Ozone O3 removal filter (aluminum honeycomb carrier)
Model： XT-CAT-07
Uses: ozone decomposition or destruction
Shape: 100*100*50mm or customize
Composition: aluminum honeycomb coated with CuO and MnO2
Characteristic: Low wind-resistance; High efficiency;
Index: See product details for specific parameters
Package: Carton
Application area: atomic cabin, radio, supersonic cabin, printers, medical equipment, household appliances (such as household disinfection cabinets and cooking devices) and other equipment.
Product Details
1)Product introduction
Hunan Xintan Ozone O3 removal filter is based on aluminum honeycombs as the carrier, using unique nanotechnology and inorganic non-metallic material formula, the surface is rich in active ingredients, It can quickly and efficiently decompose medium and low concentration ozone into oxygen at room temperature, without increasing energy consumption, no secondary pollutants. The conventional size of ozone O3 destruction catalyst(aluminum honeycomb carrier) is 150 x 150 x 50mm and 100 x 100 x 50mm, other sizes can be customized according to user requirements. The product has the characteristics of light weight, high efficiency, low wind resistance, etc., it can be applied to atomic cabin, radio, supersonic cabin, printers, medical equipment, household appliances (such as household disinfection cabinets and cooking devices) and other equipment. Since it does not contain activated carbon, it is safer in breaking down high concentrations of O3.
2)Parameters
|
Appearance |
Black honeycomb |
|
Carrier |
Porous aluminum honeycomb, microporous hexagonal length of 0.9, 1.0, 1.3, 1.5mm and other sizes |
|
Active ingredients |
Manganese-based nano composites |
|
Diameter |
150*150*50mm or 100×100×50mm or customize |
|
Bulk density |
0 .45 - 0.5g/ ml |
|
Applicable ozone concentration |
≤200ppm |
|
Operating temperature |
20~90℃is recommended, the higher the temperature is, the better the effect is, and the effect decreases obviously when the temperature is below -10℃. |
|
GHSV |
1000-150000 h-1 |
|
Decomposition Efficiency |
≥97%(20000hr-1,120ºC,Final result be different according to actual working conditions) |
|
Air pressure drop |
In the case of 0.8m/s wind speed and 50MM height, it is 30Pa |
|
Service life |
1 year |
3)Product advantages
A)Stable performance and high efficiency. Ozone O3 destruction catalyst (aluminum honeycomb carrier) has high active ingredient content, stable and durable performance.
B)Safe to use. Free of volatile components and combustible components, safe to use, no secondary pollution. Non-dangerous goods, easy to store and transport.
4)Applications
A)Printers. Printers produce a pungent smell when working, which is actually caused by ozone. Indoor residual ozone gas will cause harm to the human body, we can install Ozone O3 destruction catalyst (aluminum honeycomb carrier) in the printer's exhaust port to destroy ozone gas.
B)Medical equipment. Ozone technology has been widely used in medical equipment, such as medical ozone treatment equipment, medical wastewater treatment, medical disinfection equipment. Hunan Xintan Ozone O3 destruction catalyst (aluminum honeycomb carrier) can effectively decompose these residual low concentration O3.
C)Household disinfection cabinet. After the use of household disinfection cabinet, the residual ozone inside will cause harm to the human body, and the Ozone O3 destruction catalyst (aluminum honeycomb carrier) can be installed in the exhaust of the disinfection cabinet to decompose the residual ozone gas.
D)Cooking device. When cooking food, there will be a lot of smoke and grease. The cooking unit is integrated with the ventilation system, and a series of filters remove smoke and grease particles and expel clean air. The ozone filter can be installed in the filtration process to eliminate odor.
5) Remark:
A)The optimal reaction temperature is 20℃-90℃, lower than 10℃ may reduce the efficiency of the catalyst; Proper heating helps to improve the efficiency of the catalyst.
B)It is recommended that the humidity of the working environment be lower than 60%.
C)If the product is stored for a long term, Pls avoid water and dust, sealed at room temperature.
6)Technical support
Based on working temperature, humidity, O3 concentration, air flow, etc. Xintan team can offer advice on the size and quantity needed for your device.
Qualification Certificate
Test Report
Quality Management System Certificate
SGS
SGS
AGC
AGC
Related Products
Carbon molecular sieve, which are composed of elemental carbon, are a new type of adsorbent and an excellent non-polar carbon material. Hunan Xintan carbon molecular sieve is black columnar particles with a diameter of 1.0-1.3mm or customized. The product has the characteristics of strong nitrogen production capacity, high nitrogen recovery rate, long service life and low production cost. Carbon molecular sieve contain a large number of micropores, which have a strong instantaneous affinity for oxygen molecules and can be used to separate O2 and N2 in the air. In industry, carbon molecular sieves are often used in pressure swing adsorption (PSA) nitrogen production, which is suitable for various types of pressure swing adsorption nitrogen generators.
CO removal catalyst (Ceramic honeycomb)
CO removal catalyst (Honeycomb) uses cordierite honeycomb ceramic as a carrier and is a highly active catalyst prepared from a variety of rare earth metals. The CO removal catalyst (Honeycomb) produced by Hunan Xintan has the characteristics of high structural strength, strong surface coating adhesion, and is not easy to fall off. This catalyst can not only be used to treat carbon monoxide in flue gas, but also has high catalytic performance in chlorine-containing working conditions, and can be used for the treatment of chlorine-containing organic waste gas, and is widely used in the treatment ofsteel flue gas, lime kiln flue gas, waste incineration smoke and other smoke.
CO removal catalyst (Pt and Pd)
CO removal catalyst (pellet with Pt and Pd) is a precious metal palladium catalyst with alumina as a carrier. The carbon monoxide precious metal catalyst produced by Hunan Xintan is dark brown spherical particles with a diameter of 3-5mm, which is mainly used to remove H2 and CO at 20℃~300℃. The catalyst can convert CO to CO2 and H2 to H2O. It does not contain MnO2, CuO or S, so it can be safely used for CO purification in CO2. CO removal catalyst (pellet with Pt and Pd) have the characteristics of high catalytic efficiency, stable performance, safety, no energy consumption and long service life, and are widely used in the food industry.
CuO catalyst (for removing oxygen from Nitrogen)
CuO catalyst (for removing oxygen from Nitrogen) developed by Hunan Xintan is made of a high proportion of copper oxide (CuO) and inert metal oxides. It is a black cylindrical particle with a diameter of 5mm and a length of 5mm. The catalyst has the characteristics of high active component content, high packing density, low cost and long service life. It is a catalyst used to remove oxygen from nitrogen or inert gases such as helium and argon, which can efficiently convert oxygen to CuO without the need for additional energy. It does not contain any dangerous substances. The catalyst is widely used in gas treatment because of its high efficiency. The catalytic deoxidation reaction equation is as follows: CuO+H2=Cu+H2O 2Cu+O2=2CuO
TOP