CO removal catalyst (Pt and Pd)
Model： XT-CAT-01G
Uses: Removing CO
Shape: Diameter: 3-5mm, gray pellet
Composition: Pt,Pd,Al2O3
Characteristic: high efficiency; long lifespan,energy-saving
Index: See product details for specific parameters
Package: 1 kg vacuum plastic bag
Application area: converting CO to CO2 by oxidation, and convert H2 to H2O, safely and without energy consumption.
Product Details
1)Product introduction
CO removal catalyst (pellet with Pt and Pd) includes precious metal palladium and platinum with alumina as a carrier. The carbon monoxide precious metal catalyst produced by Hunan Xintan is dark gray spherical particles with a diameter of 3-5mm, which is mainly used to remove H2 and CO from CO2 at 20℃~300℃. The catalyst can convert CO to CO2 and H2 to H2O. It does not contain any carbon or S, so it can be safely used for CO purification in CO2. CO removal catalyst (pellet with Pt and Pd) have the characteristics of high catalytic efficiency, stable performance, safety, no energy consumption and long service life, and are widely used in the food industry.
Below is the key conditions for this noble metal catalyst:
1)Total sulfur content≤0.1PPM. (key parameter)
2) Reaction pressure < 10.0Mpa, the initial adiabatic reactor inlet temperature is generally 20 ~ 300℃.
2)Parameters
|
Ingredients |
Pd, Pt, Al2O3 |
|
Shape |
sphere |
|
Size |
Diameter: 3-5mm |
|
Bulk density |
0.70~ 0.80g/m l |
|
Surface area |
~ 170m2/ g |
|
GHSV |
2.0～5.0×103 |
|
Reaction o f CO content in tail gas |
<1ppm |
|
Working temperature |
20-300℃ |
|
Working life |
2-3 years |
|
Operating pressure |
＜10.0Mpa |
|
Loading ratio of height and diameter |
3:1 |
3)The formula to calculate required quantity
A)Based on CO and H2 concentration,airflow and working temperature and humdity;
Volume of catalyst=Airlow/GHSV;
Weight of cataly=Volume*Bulk specific gravity(bulk density);
Xintan can offer professional advice on the quantity needed.
4)Applications
CO removal catalyst (pellet with Pt and Pd) is widely used in the food industry and refuge chamber to remove CO and H2 from CO2, convert CO to CO2 by oxidation, and convert H2 to H2O, safely and without energy consumption. It's laso used in other application related to CO.
5) Remark:
A)Keep dry and sealed when storing.
B)The catalyst does not require reduction treatment before use.
C)Pay close attention to the effect of bubble and acid mist when using and storing the catalyst. When filling, first lay a layer of stainless steel wire mesh (aperture is 2.5 ~ 3mm), and then place a layer of about 10cm thick ceramic ball (Ø10 ~ 15mm); A layer of stainless steel wire mesh is placed on the upper part of the ceramic layer as the support of the catalyst bed, and then the catalyst is loaded. When loading, the relevant personnel must wear dust masks, and the height of the catalyst free fall should not be greater than 0.5 meters. Lay a layer of stainless steel wire mesh on top of the packed catalyst bed, and then place a ceramic ball (Ø10 ~ 15mm) with a thickness of 10 ~ 15cm.
D)The pressure drop of catalyst bed in industrial plant i s closely related to the ratio o f height to diameter o f catalyst bed , the size of gas flow, the porosity of gas distribution plate , the shape and size of catalyst particles , the mechanical strength and the operating process conditions. According to our experience, the ratio of height to diameter of catalyst bed is controlled at about 3:1.
Qualification Certificate
Test Report
Quality Management System Certificate
SGS
SGS
AGC
AGC
Related Products
Carbon molecular sieve, which are composed of elemental carbon, are a new type of adsorbent and an excellent non-polar carbon material. Hunan Xintan carbon molecular sieve is black columnar particles with a diameter of 1.0-1.3mm or customized. The product has the characteristics of strong nitrogen production capacity, high nitrogen recovery rate, long service life and low production cost. Carbon molecular sieve contain a large number of micropores, which have a strong instantaneous affinity for oxygen molecules and can be used to separate O2 and N2 in the air. In industry, carbon molecular sieves are often used in pressure swing adsorption (PSA) nitrogen production, which is suitable for various types of pressure swing adsorption nitrogen generators.
CO removal catalyst (Ceramic honeycomb)
CO removal catalyst (Honeycomb) uses cordierite honeycomb ceramic as a carrier and is a highly active catalyst prepared from a variety of rare earth metals. The CO removal catalyst (Honeycomb) produced by Hunan Xintan has the characteristics of high structural strength, strong surface coating adhesion, and is not easy to fall off. This catalyst can not only be used to treat carbon monoxide in flue gas, but also has high catalytic performance in chlorine-containing working conditions, and can be used for the treatment of chlorine-containing organic waste gas, and is widely used in the treatment ofsteel flue gas, lime kiln flue gas, waste incineration smoke and other smoke.
CuO catalyst (for removing oxygen from Nitrogen or Methanol Synthesis)
CuO catalyst (for removing oxygen from Nitrogen or Methanol Synthesis) developed by Hunan Xintan is made of a high proportion of copper oxide (CuO) and inert metal oxides. It is a black cylindrical particle with a diameter of 5mm and a length of 5mm. The catalyst has the characteristics of high active component content, high packing density, low cost and long service life. It is a catalyst used to remove oxygen from nitrogen or inert gases such as helium and argon, which can efficiently convert oxygen to CuO without the need for additional energy. It does not contain any dangerous substances. The catalyst is widely used in gas treatment because of its high efficiency. The catalytic deoxidation reaction equation is as follows: CuO+H2=Cu+H2O 2Cu+O2=2CuO
Hopcalite catalyst, also known as carbon monoxide (CO) removal catalyst, is made of a certain proportion of MnO2 and CuO through bonding mixing and mechanical processing. The catalyst is black or dark brown columnar particles with a diameter of 1.1mm or 3mm. It is a catalyst that removes CO by oxidizing CO to CO2. The hopcalite catalyst produced by Hunan Xintan can catalyze the reaction of CO and O2 quickly and efficiently under the condition of 20~200℃, converting CO into CO2, which has the characteristics of high efficiency, high catalytic activity, energy saving, long service life and low maintenance cost. Xintan hopcalite catalyst is widely used in nitrogen (N2), gas masks, refuge chambers, compressed air breathing equipment and other industrial gas treatment.
TOP