Hopcalite powder(copper-manganese mixed oxide)
Model： XT-CAT-01F
Uses: removing CO(convert CO into CO2)
Shape: Powder(200 mesh or customized)
Composition: CuO and MnO2
Characteristic: high efficiency; high catalytic activity; long service life;
Index: See product details for specific parameters
Package: 30kg / 40kg iron drum with lining
Application area: used as coating material, coating on honeycomb carrier; As laboratory gas detection processing materials.
Product Details
1)Product introduction
Hopcalite powder(copper-manganese mixed oxide) is made by mixing a certain proportion of MnO2 with CuO. The catalyst is in black or dark brown powder form and is a catalyst that removes CO by oxidizing CO to CO2. The Hopcalite powder produced by Hunan Xintan has the characteristics of high efficiency, high catalytic activity, low cost and long service life. It can be used as raw material for producing carbon monoxide catalyst and ozone decomposition catalyst, and can remove carbon monoxide and ozone by itself. Used as coating material, coating on honeycomb carrier; as laboratory gas detection processing materials.
2)Parameters
|
Appearance |
Black or dark brown powder |
|
Ingredients |
MnO2, CuO |
|
Cu:Mn |
0.86~0.95 |
|
Size |
200mesh or customized |
|
Length |
2-5mm or 5-10mm or Customize (hopcalite particle) |
|
Bulk density |
0 .45~0.50g/ ml |
|
Surface area |
＞180m2/g |
|
Moisture content |
≤5% |
3)Product advantages
A)High activity and high efficiency. Xintan hopcalite powder (copper-manganese mixed oxide) has highly active formulation that effectively converts CO to CO2. The active ingredient content of hopcalite powder is more than 85%, and the specific surface area is higher than 180m2/g, which can effectively improve the catalytic efficiency of the product.
B)Low cost. The catalyst can oxidize CO gas at room temperature.
C)Long service life. The life of Xintan hopcalite powder (copper-manganese mixed oxide) can reach 2-3 years.
4)Applications
A)As raw material for the production of carbon monoxide removal catalyst and ozone decomposition catalyst;
B)Used to eliminate carbon monoxide and ozone;
C)Used as coating material, coating on honeycomb carrier;
D)As laboratory gas detection processing materials.
5) Remark:
A)Keep dry when storing and seal iron drums.
B)Regeneration conditions: The catalyst can be regenerated at a temperature of 150-200℃.
6)Technical support
Based on working temperature, humidity, gas flow and CO concentration, Xintan team can advise you on the quantity of Hopcalite powder required for your equipment. In addition, it is recommended to control the humidity of the working environment below 10%. High humidity working environment will reduce the use of catalyst effect, shorten the service life. When the humidity is greater than 10%, it can be used with desiccant.
Qualification Certificate
Test Report
Quality Management System Certificate
SGS
SGS
AGC
AGC
Related Products
Carbon molecular sieve, which are composed of elemental carbon, are a new type of adsorbent and an excellent non-polar carbon material. Hunan Xintan carbon molecular sieve is black columnar particles with a diameter of 1.0-1.3mm or customized. The product has the characteristics of strong nitrogen production capacity, high nitrogen recovery rate, long service life and low production cost. Carbon molecular sieve contain a large number of micropores, which have a strong instantaneous affinity for oxygen molecules and can be used to separate O2 and N2 in the air. In industry, carbon molecular sieves are often used in pressure swing adsorption (PSA) nitrogen production, which is suitable for various types of pressure swing adsorption nitrogen generators.
CO removal catalyst (Ceramic honeycomb)
CO removal catalyst (Honeycomb) uses cordierite honeycomb ceramic as a carrier and is a highly active catalyst prepared from a variety of rare earth metals. The CO removal catalyst (Honeycomb) produced by Hunan Xintan has the characteristics of high structural strength, strong surface coating adhesion, and is not easy to fall off. This catalyst can not only be used to treat carbon monoxide in flue gas, but also has high catalytic performance in chlorine-containing working conditions, and can be used for the treatment of chlorine-containing organic waste gas, and is widely used in the treatment ofsteel flue gas, lime kiln flue gas, waste incineration smoke and other smoke.
CO removal catalyst (Pt and Pd)
CO removal catalyst (pellet with Pt and Pd) is a precious metal palladium catalyst with alumina as a carrier. The carbon monoxide precious metal catalyst produced by Hunan Xintan is dark brown spherical particles with a diameter of 3-5mm, which is mainly used to remove H2 and CO at 20℃~300℃. The catalyst can convert CO to CO2 and H2 to H2O. It does not contain MnO2, CuO or S, so it can be safely used for CO purification in CO2. CO removal catalyst (pellet with Pt and Pd) have the characteristics of high catalytic efficiency, stable performance, safety, no energy consumption and long service life, and are widely used in the food industry.
CuO catalyst (for removing oxygen from Nitrogen or Methanol Synthesis)
CuO catalyst (for removing oxygen from Nitrogen or Methanol Synthesis) developed by Hunan Xintan is made of a high proportion of copper oxide (CuO) and inert metal oxides. It is a black cylindrical particle with a diameter of 5mm and a length of 5mm. The catalyst has the characteristics of high active component content, high packing density, low cost and long service life. It is a catalyst used to remove oxygen from nitrogen or inert gases such as helium and argon, which can efficiently convert oxygen to CuO without the need for additional energy. It does not contain any dangerous substances. The catalyst is widely used in gas treatment because of its high efficiency. The catalytic deoxidation reaction equation is as follows: CuO+H2=Cu+H2O 2Cu+O2=2CuO
TOP