Activated alumina ball
Model： XT-DES-02
Uses: use as desiccant and carrier of catalyst
Shape: Ф 3-5mm, white pellet
Composition: Al2O3
Characteristic: high mechanical strength; strong absorption
Index: See product details for specific parameters
Package: Plastic bag / Carton / Paper drum / Steel drum
Application area: widely used for deep drying of petroleum cracking gas, ethylene propylene gas and hydrogen production, air separation device, instrument air dryer drying, fluoride treatment in hydrogen peroxide can also remove sulfur gas hydrogen, sulfur dioxide, hydroge
Product Details
1)Product introduction
Activated alumina ball is mainly composed of alumina, which is an excellent adsorbent and desiccant. Activated alumina ball is white spherical particle with uniform particle size, smooth surface, high mechanical strength, strong absorption, water immersion unchanged soft, no expansion, no powder, no rupture and so on. Activated alumina ball is an essential product for compressed air dehydration and drying. In industry, it can be widely used for deep drying of petroleum cracking gas, ethylene propylene gas and hydrogen production, air separation device, instrument air dryer drying, fluoride treatment in hydrogen peroxide can also remove sulfur gas hydrogen, sulfur dioxide, hydrogen fluoride, hydrocarbons and other pollutants in the exhaust gas, especially suitable for fluorine water defluorination treatment.
2)Parameters
|
Ingredients |
Al2O3(>93%) |
|
Appearance |
White sphere,Ф3-5mm |
|
Chemical type |
x-p |
|
LOI |
≤8% |
|
Apparent density |
>0.75g/ml |
|
Milling strength |
>80% |
|
Crushing strength |
≥150N (size:Ф3-5mm) |
|
Bulk density |
0.68-0.72g/ml |
|
Surface area |
≥300m2/g |
|
Pore volume |
0.30-0.45ml/g |
|
Static absorption(RH=60%) |
17-19% |
|
Attrition Loss |
≤1.0% |
3)Product advantages
A)High adsorption capacity. Activated alumina ball has high water absorption due to its largespecific surface area and unique pore distribution structure.
B)High extrusion strength. Activated alumina ball has a high extrusion strength, which can be quickly pneumatically loaded into the tower. The high extrusion strength also allows the higher absorber to dry the gas more efficiently. At the same time, activated alumina ball can effectively prevent ammonia from entering.
C)Low wear. The low wear characteristics of activated alumina ball ensure that it reduces the production of dust during gas/liquid transport, and can reduce the gas pressure drop during use, minimize the clogging of downstream valves and filters, and reduce the appearance of dusty products.
4)Applications
Activated alumina ball is widely used for deep drying of petroleum cracking gas, ethylene propylene gas and hydrogen production, air separation device, instrument air dryer drying, fluoride treatment in hydrogen peroxide can also remove sulfur gas hydrogen, sulfur dioxide, hydrogen fluoride, hydrocarbons and other pollutants in the exhaust gas, especially suitable for fluorine water defluorination treatment.
5)Remark:
Store in an airtight container to prevent contact with air to avoid deterioration.
Qualification Certificate
Test Report
Quality Management System Certificate
SGS
SGS
AGC
AGC
Related Products
Carbon molecular sieve, which are composed of elemental carbon, are a new type of adsorbent and an excellent non-polar carbon material. Hunan Xintan carbon molecular sieve is black columnar particles with a diameter of 1.0-1.3mm or customized. The product has the characteristics of strong nitrogen production capacity, high nitrogen recovery rate, long service life and low production cost. Carbon molecular sieve contain a large number of micropores, which have a strong instantaneous affinity for oxygen molecules and can be used to separate O2 and N2 in the air. In industry, carbon molecular sieves are often used in pressure swing adsorption (PSA) nitrogen production, which is suitable for various types of pressure swing adsorption nitrogen generators.
CO removal catalyst (Ceramic honeycomb)
CO removal catalyst (Honeycomb) uses cordierite honeycomb ceramic as a carrier and is a highly active catalyst prepared from a variety of rare earth metals. The CO removal catalyst (Honeycomb) produced by Hunan Xintan has the characteristics of high structural strength, strong surface coating adhesion, and is not easy to fall off. This catalyst can not only be used to treat carbon monoxide in flue gas, but also has high catalytic performance in chlorine-containing working conditions, and can be used for the treatment of chlorine-containing organic waste gas, and is widely used in the treatment ofsteel flue gas, lime kiln flue gas, waste incineration smoke and other smoke.
CO removal catalyst (Pt and Pd)
CO removal catalyst (pellet with Pt and Pd) is a precious metal palladium catalyst with alumina as a carrier. The carbon monoxide precious metal catalyst produced by Hunan Xintan is dark brown spherical particles with a diameter of 3-5mm, which is mainly used to remove H2 and CO at 20℃~300℃. The catalyst can convert CO to CO2 and H2 to H2O. It does not contain MnO2, CuO or S, so it can be safely used for CO purification in CO2. CO removal catalyst (pellet with Pt and Pd) have the characteristics of high catalytic efficiency, stable performance, safety, no energy consumption and long service life, and are widely used in the food industry.
CuO catalyst (for removing oxygen from Nitrogen)
CuO catalyst (for removing oxygen from Nitrogen) developed by Hunan Xintan is made of a high proportion of copper oxide (CuO) and inert metal oxides. It is a black cylindrical particle with a diameter of 5mm and a length of 5mm. The catalyst has the characteristics of high active component content, high packing density, low cost and long service life. It is a catalyst used to remove oxygen from nitrogen or inert gases such as helium and argon, which can efficiently convert oxygen to CuO without the need for additional energy. It does not contain any dangerous substances. The catalyst is widely used in gas treatment because of its high efficiency. The catalytic deoxidation reaction equation is as follows: CuO+H2=Cu+H2O 2Cu+O2=2CuO
TOP