CO removal catalyst (Honeycomb)
Model： XT-051
Characteristic： high structural strength; strong surface coating adhesion; not easy to fall off.
Specifications： 100 x 100 x 50mm or customized
Index： See product details for specific parameters
Package： carton
Application area： used to treat carbon monoxide in flue gas, but also has high catalytic performance in chlorine-containing working conditions, and can be used for the treatment of chlorine-containing organic waste gas, and is widely used in the treatment ofsteel flue gas
Product Details
1)Product introduction
CO removal catalyst (Honeycomb) uses cordierite honeycomb ceramic as a carrier and is a highly active catalyst prepared from a variety of rare earth metals. The CO removal catalyst (Honeycomb) produced by Hunan Xintan has the characteristics of high structural strength, strong surface coating adhesion, and is not easy to fall off. This catalyst can not only be used to treat carbon monoxide in flue gas, but also has high catalytic performance in chlorine-containing working conditions, and can be used for the treatment of chlorine-containing organic waste gas, and is widely used in the treatment ofsteel flue gas, lime kiln flue gas, waste incineration smoke and other smoke.
2)Parameters
|
Appearance |
Black honeycomb |
|
Ingredients |
Mn, Zr, etc. |
|
Carrier |
Cordierite honeycomb ceramic, square, 200cpi |
|
Size |
100 x 100 x 50mm or customized |
|
Bulk density |
560 g/L± 50 |
|
Total active load |
50~60g/L±0.5or customized |
|
Recommended GHSV |
8000~20000h-1(depends on the working conditions) |
|
Recommended wind speed |
<1.5 m/s |
|
Working temperature range |
120~350℃ |
|
Maximum short-time temperature resistance |
600℃ |
|
Efficiency |
>95% |
|
Compressive strength |
≥10MPa |
|
Desorption temperature |
≤120℃ |
|
Service life |
2-3 years |
3)Applications
CO removal catalyst (Honeycomb) is specially used for carbon monoxide in flue gas, and does not contain halogen, sulfur and excessive dust, which affect the exhaust gas treatment. It is widely used in the treatment of steel flue gas, lime kiln flue gas, waste incineration flue gas and other flue gas.
4) Remark:
A)Avoid water and dust when storing, and seal at room temperature.
B)The waste gas shall not contain sulfur, phosphorus, arsenic, lead, mercury, other halogens other than chlorine (fluorine, bromine, iodine, astatine), heavy metals, resins, high boiling point, high viscosity polymers and other toxic chemical elements or substances;
C)The catalyst should be handled lightly, and the direction of the catalyst hole should be consistent with the direction of the air flow when filling, and should be placed closely without any gap;
D)When the activity of the catalyst decreases for a long time, the catalytic bed can be switched back and forth or up and down, or the working temperature of the catalytic chamber can be appropriately increased;
E)The catalyst should be moisture-proof and not soaked or washed with water.
Qualification Certificate
Quality Management System Certificate
Invention Patent Certificate
High-tech enterprises
Related Products
Carbon molecular sieve, which are composed of elemental carbon, are a new type of adsorbent and an excellent non-polar carbon material. Hunan Xintan carbon molecular sieve is black columnar particles with a diameter of 1.0-1.3mm or customized. The product has the characteristics of strong nitrogen production capacity, high nitrogen recovery rate, long service life and low production cost. Carbon molecular sieve contain a large number of micropores, which have a strong instantaneous affinity for oxygen molecules and can be used to separate O2 and N2 in the air. In industry, carbon molecular sieves are often used in pressure swing adsorption (PSA) nitrogen production, which is suitable for various types of pressure swing adsorption nitrogen generators.
CO removal catalyst (pellet with Pt and Pd)
CO removal catalyst (pellet with Pt and Pd) is a precious metal palladium catalyst with alumina as a carrier. The carbon monoxide precious metal catalyst produced by Hunan Xintan is dark brown spherical particles with a diameter of 3-5mm, which is mainly used to remove H2 and CO from CO2 at 160℃~300℃. The catalyst can convert CO to CO2 and H2 to H2O. It does not contain MnO2, CuO or S, so it can be safely used for CO purification in CO2. CO removal catalyst (pellet with Pt and Pd) have the characteristics of high catalytic efficiency, stable performance, safety, no energy consumption and long service life, and are widely used in the food industry.
CuO catalyst (for removing oxygen from Nitrogen)
CuO catalyst (for removing oxygen from Nitrogen) developed by Hunan Xintan is made of a high proportion of copper oxide (CuO) and inert metal oxides. It is a black cylindrical particle with a diameter of 5mm and a length of 5mm. The catalyst has the characteristics of high active component content, high packing density, low cost and long service life. It is a catalyst used to remove oxygen from nitrogen or inert gases such as helium and argon, which can efficiently convert oxygen to CuO without the need for additional energy. It does not contain any dangerous substances. The catalyst is widely used in gas treatment because of its high efficiency. The catalytic deoxidation reaction equation is as follows: CuO+H2=Cu+H2O 2Cu+O2=2CuO
Hopcalite catalyst, also known as carbon monoxide (CO) removal catalyst, is made of a certain proportion of MnO2 and CuO through bonding mixing and mechanical processing. The catalyst is black or dark brown columnar particles with a diameter of 1.1mm or 3mm. It is a catalyst that removes CO by oxidizing CO to CO2. The hopcalite catalyst produced by Hunan Xintan can catalyze the reaction of CO and O2 quickly and efficiently under the condition of 20~200℃, converting CO into CO2, which has the characteristics of high efficiency, high catalytic activity, energy saving, long service life and low maintenance cost. Xintan hopcalite catalyst is widely used in nitrogen (N2), gas masks, refuge chambers, compressed air breathing equipment and other industrial gas treatment.
online message