Ozone Treatment Solutions for Corona Treatment Equipment

Corona treatment is one of the most widely used surface modification technologies in the film, packaging, label, adhesive tape, printing, and laminating industries.
By generating a high-voltage electrical discharge, corona treatment increases the surface energy of materials, improving the adhesion of inks, coatings, and adhesives.
However, a natural by-product of the corona discharge process is ozone (O₃). While ozone generation is unavoidable during corona treatment, excessive ozone can create safety concerns, accelerate equipment aging, and affect workplace air quality if not properly controlled.
As a result, efficient ozone treatment has become an important consideration for both corona treatment equipment manufacturers and end users.
-
Why Does Corona Treatment Generate Ozone?
Corona treatment systems operate by creating a high-frequency, high-voltage electrical discharge between electrodes and a grounded roll. During this process, oxygen molecules (O₂) in the surrounding air are split into oxygen atoms (O), which subsequently combine with oxygen molecules to form ozone (O₃).
The amount of ozone generated depends on several factors, including:
-
Equipment power;
-
Treatment width;
-
Production speed;
-
Discharge intensity;
-
Ventilation conditions.
In high-speed production lines, significant amounts of ozone may enter the exhaust system and require treatment before discharge. Without proper ozone control, elevated ozone levels can contribute to workplace exposure concerns and accelerate the deterioration of seals, electrical components, and other equipment materials.
-
Common Ozone Treatment Methods Several ozone treatment methods are commonly used in corona treatment systems:
-
Natural dilution and ventilation;
-
Activated carbon adsorption;
-
Catalytic ozone destruction.
Natural ventilation may be suitable for limited applications but often cannot meet modern environmental and workplace requirements.
Activated carbon can remove ozone through adsorption and oxidation, but its effectiveness gradually decreases as the material becomes exhausted. For continuously operating corona treatment lines, frequent replacement of activated carbon can increase maintenance costs and downtime. This has led many equipment manufacturers to adopt catalytic ozone destruction technology as a long-term solution.
-
How Ozone Destruction Catalysts Work
Ozone destruction catalysts accelerate the decomposition of ozone into oxygen through catalytic reactions: 2O₃ → 3O₂
Instead of storing ozone like an adsorbent, the catalyst continuously promotes ozone conversion into oxygen. Because the catalyst is not consumed in the reaction itself, it can provide stable long-term performance under suitable operating conditions.
For corona treatment systems, catalytic ozone destruction offers several advantages:
-
High ozone removal efficiency;
-
Continuous operation capability;
-
Low pressure drop;
-
Reduced maintenance requirements;
-
Long service life;
-
Compatibility with various equipment sizes.
-
Key Requirements for Corona Treatment Applications
Corona treatment equipment often operates continuously for extended periods. Therefore, ozone destruction catalysts must provide not only high ozone conversion efficiency but also excellent durability and mechanical strength. In addition, low pressure drop is often required to maintain proper airflow through the exhaust system.
For certain applications, moisture resistance may also be an important consideration.
When selecting an ozone destruction catalyst, engineers should evaluate:
-
Ozone concentration;
-
Airflow rate;
-
Temperature and humidity;
-
Available installation space;
-
Required outlet ozone concentration;
-
Maintenance intervals.
-
XT-CAT Series Ozone Destruction Catalysts
The XT-CAT Series Ozone Destruction Catalysts from Hunan Xintan New Material are designed specifically for industrial ozone treatment applications. Using MnO₂-based active components, XT-CAT catalysts are widely used in:
-
Film corona treatment systems;
-
Packaging and label production lines;
-
Printing and laminating equipment;
-
Plasma surface treatment systems;
-
Industrial ozone exhaust treatment units.
As corona treatment equipment continues to evolve toward higher speeds, wider processing widths, and continuous production, reliable and low-maintenance ozone treatment solutions are becoming increasingly important.
Effective ozone treatment is not only an environmental requirement—it is also a key factor in ensuring equipment reliability, workplace safety, and lower long-term operating costs.
Related News